TX announce: CR3 Pro, Hack for 15574+, Corona V3 hacked and much more
The Xecuter Team gives today a LOT of info about their upcoming product for RGH after the announce yesterday of the Xecuter LT Ultimate (DVD Drive related). The main informations are :
- the CR3Pro developpement is now close to be over
- with an addon for CR3Pro called CR3-DGX you will be able to glitch 15574+ console
- the lastest corona motherboard with samsung eMMC can be gltiched the upcoming TX product
- an addon to convert demon small block (16MB) to big block (256-512MB) will be released soon.
Here is all TX message :
NEWS #1: CR3 PRO
It’s been 6 months in the making (no thanks to several motherboard/dashboard revisions during our development time), and now after an exhaustive test run, the CR3 Pro is ready for public consumption.
This is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level.
The first release of CR3 Pro is designed for slims only. The full kit includes new V3 QSB’s for Trinity, Corona v1 (16MB Hynix TSOP) and v2 (4GB Phison BGA) (These are also available to buy separately for use with legacy CoolRunners Rev A, B & C and also the CR3 Lite and a Phat version V3 QSB kit is also available – See News #5). A Brand new POST V2 for complete monitoring and tuning using the new CR3 Pro Rater software is also included (J-R Programmer v2 required – See News #6)
Note: For Corona v2 (4GB) Nand Read/Write you will need the 4GB RW Kit.
CR3 Pro Installed to a Corona v1:
CR3 Pro Rater Screenshot:
A dedicated CR3 Pro Phat version is in progress – currently having fun with « un-glitchable » zephyrs and falcons
Full details / specs / install pics / prices / release date etc will be available shortly.
NEWS #2: CR3-DGX
The CR3-DGX is an add-on that connects to the CR3 Pro. We have been working on this bad boy for some time – it’s really kick-ass and only made possible by the high level of accuracy and timing of the CR3 Pro.
- Fast Recovery of CPU/DVD Key from 2.0.15572.0 – Tested on Trinity, Corona v1 & Corona v2 (4GB)
- Fast Recovery of CPU/DVD Key from 2.0.15574.0 – Tested on Trinity, Corona v1 & Corona v2 (4GB)
- Fast Recovery of CPU/DVD Key from 2.0.16197.0 – Tested on Trinity, Corona v1 & Corona v2 (4GB)
- Full details / specs / install pics / prices / release date etc will be available shortly
Here is a shot of the CR3-DGX prototype. It’s disguised for obvious reasons:
NEWS #3: CORONA V3 (Samsung 64MB BGA)
The new Corona v3 with Samsung 64MB BGA hit the market last month in small quantities
Several changes however with a couple of tweaks and a new Corona v3 QSB kit we were able to glitch – so don’t panic – this one is easily done
NEWS #4: DEMON PHAT SB to BB CONVERSION
We have completed a simple conversion kit for all DemoN Phat so you can install to any BB 256MB or 512MB without having to buy a new version DemoN.
There is also a new firmware which is being tested right now and we hope to have it all released in the next couple of weeks.
NEWS #5: J-R Programmer / NAND-X / CoolRunner QSB V3 Kits Now On Sale
The new V3 QSB kits are now available which also allow Xell monitoring over SERIAL/UART using the latest version J-Runner software (NAND-X USB Update Cable Required – we designed the software so it could also use this cable without having to design a new one). The new V3 QSB’s are also designed to be Plug n Play compatible with both J-R Programmer & NAND-X and offer the cleanest and most optimum RGH install possible.
Now on sale with all official resellers:
Corona QSB V3 Kit + SERIAL/UART Monitoring using NAND-X USB Update Cable:
J-Runner Monitor COM Screen animation – Very geeky and also awesome when you can’t get an video signal from Xell
NEWS #6: J-R Programmer v2
The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X
NEW 2 Version with Full POSt Monitoring and CR3 Pro Rater Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !)
The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 !
Complete with a CR JTAG cable so you simply plug ‘n program without any soldering using the latest J-Runner App (needs to be at least Build 283). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don’t use the QSB’s you can simply cut off the connectors and do a normal wires only install.
The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED’s indicate Power and BootLoader mode.
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
RED LED FLASHING: R/W Activity & POST Activity (Switch to the right)
Fast NAND Programming
Fast XILINX CR JTAG Programming
Compatible with all CoolRunners inc the new CR3 Pro
Supports Full Post Monitoring
Compatible with both Phat and Slim
Onboard LED’s indicate Power & Data
Easy Install System
Compatible with All NAND-X QSB’s
Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately)
Includes Cable For Xilinx CRJTAG
Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately – Trinity Kit or Corona Kit)
Includes KIOSK option for Remote On
Built-in Programmer For Future Firmware Upgrades
Designed for the latest J-Runner App (Build 283+)
Rock Solid Design – Tested by the J-Runner Team
Supports New QSB V3 Kits (Solder Separately)
Supports Sonus 360 Programming
Affordable – We Provide You With More For Less !
High Quality & Trusted TX Design